Amiga Hardware DatabaseManufacturer “Jürgen Kommos”
3 expansions in database
Manufacturer Jürgen Kommos, Germany | Date 1991 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- SCSI 2 controller
- place for a 3.5" hard disk on the card
- the SCSI cable is soldered onto the card and there is no external SCSI connector - a T-adapter is required to add more than one SCSI device, by placing the controller in the middle of the SCSI chain
- autoboot ROM (jkscsi.device)
- not RDB compatible
front side
back side
- Kommos_SCSI.dms
install disk
350 kB
Manufacturer Jürgen Kommos, Germany | Date 1991 | Amiga A500 | Interface side expansion port |
- SCSI 2 controller
- place for a 3.5" hard disk inside the case
- 50 pin internal SCSI header
- no external SCSI connector
- autoboot ROM (jkscsi.device)
- no RAM option
- passthrough connector
front side
back side
- Kommos_SCSI.dms
install disk
350 kB
Manufacturer Jürgen Kommos, Germany | Date 1992 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 3 / 1 |
- EPROM burner
- one socket for burning 24, 28 and 32 pin EPROMs
- one socket for burning 40 pin EPROMs
- supports any EPROMs of the 27xxx series:
- 2 kB, 8×2k (2716)
- 4 kB, 8×4k (2732)
- 8 kB, 8×8k (2764)
- 16 kB, 8×16k (27128)
- 32 kB, 8×32k (27256)
- 64 kB, 8×64k (27512)
- 64 kB, 8×4×16k (27513)
- 128 kB, 8×128k (27010, 27C1000)
- 128 kB, 8×8×16k (27011)
- 128 kB, 16×64k (27210, 27C1024)
- 256 kB, 8×256k (27020)
- 256 kB, 16×128k (27220, 27C2048)
- 512 kB, 8×512k (27040)
- 512 kB, 16×256k (27240, 27C4096)
- 1 MB, 8×1024k (27080)
- 32 kB Static RAM, 32×8k (43256)
- functions: emptyness test, reading, burning, load from disk, save to disk, compare, hexdump
- when selecting the EPROM type in software, one of the four LEDs is lit to indicate the correct position of the EPROM
front side
back side