Manufacturer “Hydra Systems”
4 expansions in database
Manufacturer Hydra Systems, UK | Date 1990 | Amiga A2000, A3000, A4000
| Interface Zorro II
| Autoconfig ID 2121 / 1
|
Ethernet interface
- National Semiconductor DP8390 Ethernet controller
- 16 kB SRAM buffer using DMA to and from the DP8390
- AmigaNet v1.0 & 1.1:
- DB15 AUI port (10Base5)
- one or two BNC (10Base2) connectors - in case of two BNCs there is no need for T connectors, Hydras can be simply daisychained
- AmigaNet v1.2:
- one BNC (10Base2) connector
- one RJ45 (10BaseT) connector mounted on the card or one DB15 AUI connector mounted on a separate card plate
- status LEDs
- SANA II compatible driver (hydra.device)
- 30% slower than the Commodore A2065
- supported by Linux, NetBSD and OpenBSD
Rev 1.2A, front side
Rev 1.2A, front side
Rev 1.2A, back side
Rev 1.1A, front side
Rev 1.1, front side
Rev 1.1, front side
Rev 1.1, front side
Rev 1.1, back side
Advert (DE)
1990-12 Advert (GB)
1993-04 Advert (GB)
1993-05 Advert (GB)
1994-08 Advert (US)
1990-03
Manufacturer Hydra Systems, UK | Date 1990 | Amiga A500
| Interface side expansion port
| Autoconfig ID 2121 / 1
|
Ethernet interface
- connects to the side expansion port - the case contains a standard Zorro II AmigaNet card
- National Semiconductor DP8390 Ethernet controller
- 16 kB SRAM buffer using DMA to and from the DP8390
- DB15 AUI port (10Base5)
- two BNC connectors (10Base2) - no need for T connectors, Hydras can be simply daisychained
- SANA II compatible driver (hydra.device)
- supported by Linux, NetBSD and OpenBSD
Case, top side
Inside, top side
Connector board, front side
Connector board, back side
Manufacturer Hydra Systems, UK | Date 1992 | Amiga A600, A1200
| Interface PCMCIA
|
Ethernet interface
- contains an IBM made PCMCIA Ethernet adapter
- 16 kB buffer
- BNC connector (10Base2)
- SANA II compatible driver (hydrapcm.device)
front side
Ethernet interface
- ANet is basically a Hydra AmigaNet distributed by GVP
Advert (US)
1990-08