Amiga Hardware DatabaseManufacturer “Edotronik”
9 expansions in database
Manufacturer Edotronik, Germany | Amiga A2000 | Interface Zorro II | Autoconfig ID 2064 / 7 |
- No description available.
Do you own this expansion, or have information about it? Please let us know.
Manufacturer Edotronik, Germany | Amiga A2000 | Interface Zorro II | Autoconfig ID 2064 / 4 |
- No description available.
Do you own this expansion, or have information about it? Please let us know.
Manufacturer Edotronik, Germany | Autoconfig ID 2064 / 2 |
- No description available.
Do you own this expansion, or have information about it? Please let us know.
Manufacturer Edotronik, Germany | Amiga A2000 | Interface Zorro II | Autoconfig ID 2064 / 9 |
- No description available.
Do you own this expansion, or have information about it? Please let us know.
Manufacturer Edotronik, Germany | Date 1992 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2064 / 1 |
- IEEE-488 / IEC-625 bus interface
- interface functions: SH, AH, T, TE, L, LE, SR, PP, DC, DT, C
- iec.library with full talker / listener functions
- IEC: AmigaDOS device
- interfacing of nonstandard devices is possible (eg. CBM 8xxx)
Advert (DE)
1990-01
Advert (DE)
1990-05
Advert (DE)
1992-12
Manufacturer Edotronik, Germany | Date 1992 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2064 / 5 |
- parallel interface
- parallel ports are realized with 6522 chips - one of them can be directly accessed as PAR2:
- one DB25 parallel connector (PAR2:)
- fully compatible with AmigaDOS, all commands of parallel.device are supported
- redirection of I/O between SER: / PAR: and PAR2: (device mapping)
- 32 TTL output lines
- 32 TTL input lines
- additional daughterboards for relais output and / or optocouplers are available
Advert (DE)
1992-12
Manufacturer Edotronik, Germany | Date 1992 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2064 / 6 |
- PIC prototyping card
- multi-purpose prototyping board with breadboard area for designing circuits
- AutoConfig fully conforming to Commodore standards
- complete buffering on board
- bidirectional drivers for data and addresses
- double sided printed circuit board
Advert (DE)
1990-01
Advert (DE)
1990-05
Manufacturer Edotronik, Germany | Date 1992 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2064 / 3 |
- serial interface
- four bidirectional serial ports
- 110 - 19200 bps transfer speeds
- a dedicated processor controls the I/O operations to avoid system slow-downs during serial transfers
- supports several protocols with the supplied drivers
Manufacturer Edotronik, Germany | Date 1992 | Amiga A2000 | Interface Zorro II | Autoconfig ID 2064 / 8 |
- allows the Amiga to access the VME bus as Master Controller
- consists of two cards, a Zorro II and a VME bus card
- the cards are connected together by a 64 pin ribbon cable
- supports 24 bit address and 16 bit data lines
- bus requests on all 4 levels can be enabled with jumpers
- the interrupt handler supports all 7 interrupt levels
- requires 2 MB RAM
front side
front side
back side
front side
Advert (DE)
1990-01
Advert (DE)
1990-05