Amiga Hardware DatabaseManufacturer “Combitec”
10 expansions in database
Manufacturer Combitec, Germany | Date 1989 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- autobooter
- provides autoboot functionality for the Commodore A2090 SCSI controller
- two autoboot ROMs
- autoboots with Kickstart 1.2 and 1.3
- supports FastFileSystem
- replaces the drive request procedure of the A2090 - no 8 seconds wait for drives to show up
- checks for bootable drives in the following order:
- 1st ST506 drive
- 2nd ST506 drive
- 1st SCSI drive
- 2nd to 7th SCSI drive
- can be disabled with jumper or by holding the right mouse button during startup
- works with the A2090A (if A2090A autoboot ROMs are removed)
front side
back side
- Combitec_AutoBoot-Karte.pdf
user manual (german)
185 kB
- Combitec_AutoBoot-10.dms
install disk
342 kB
Advert (DE)
1989-08
Advert (DE)
1989-10
Manufacturer Combitec, Germany | Date 1988 | Amiga any Amiga | Interface serial port, parallel port |
- radio clock
- DCF77 time code receiver and internal quartz clock
- displays current time and has typical clock functions like alarm setting or slumber mode
- LED indicates time code synchronization
- 4 control buttons: alarm off, slumber, mode and date
- connects to the serial port ("Clock 77 S") or parallel port ("Clock 77 P")
- 4 relay control outputs
- 32 times can be set to either emit an acoustic signal or control one of the 4 outputs
- optional mains outlet allows switching of 220V devices
- software to set the Amiga system clock (SetDcfClock)
Advert (DE)
1988-10
Advert (DE)
1988-10
Advert (DE)
1988-11
Manufacturer Combitec, Germany | Date 1989 | Amiga A1000 | Interface side expansion port | Autoconfig ID 49160 / |
- hard disk adapter
- adapter for the Combitec HD 20 or HD 40 external hard disk unit
- HD 20 contains an OMTI 5528 controller card and the ST-506 hard disk
- D-RAM 1000 contains the autoboot ROM
- the two units are connected through DB25 connectors
- hard disk disable switch
- memory
- eight SIP sockets for up to 8 MB RAM
- supports only 2, 4 or 8 MB configurations, it cannot be set to 6 MB
- accepts 1 MB SIPs in groups of two, 120 ns or faster
- no waitstates
- memory disable switch
Exterior, rear side
Case opened, rear side
Advert (DE)
1989-07
Manufacturer Combitec, Germany | Date 1989 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 26470 / 130,132,136 |
- eight SIP sockets accept 8 MB RAM
- supports only 2, 4 or 8 MB configurations, it cannot be set to 6 MB
- each memory configuration gives a different AutoConfig product ID
- accepts 1 MB SIPs in groups of two, 120 ns or faster
- no waitstates
- memory autoconfig
front side
back side
Advert (DE)
1989-04
Advert (DE)
1989-07
Manufacturer Combitec, Germany | Date 1989 | Amiga A500 | Interface side expansion port | Autoconfig ID 49160 / |
- a HD 20 A hard disk adapter with additional memory daughterboard
- eight SIP sockets for up to 8 MB RAM
- supports only 2, 4 or 8 MB configurations, it cannot be set to 6 MB
- accepts 1 MB SIPs in groups of two, 120 ns or faster
- no waitstates
- hard disk and memory disable switches
- passthrough connector
Advert (DE)
1988-11
Advert (DE)
1989-07
Manufacturer Combitec, Germany | Date 1989 | Amiga A500 | Interface trapdoor slot |
- 512 kB RAM
- sixteen 256k×1 DIPs
- battery backed up clock
- disable switch
- connects to the trapdoor slot
front side
back side
Advert (DE)
1989-03
Advert (DE)
1989-07
Manufacturer Combitec, Germany | Date 1990 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- RLL / ST-506 controller
- place for a 3.5" hard disk on the card
- autoboot ROM - autoboots even under Kickstart 1.2
- works only with hard disks with OMTI or Adaptec controller
Manufacturer Combitec, Germany | Date 1989 | Amiga A500 | Interface side expansion port | Autoconfig ID 49160 / 42 |
- adapter for the Combitec HD 20 or HD 40 external hard disk unit
- HD 20 contains an OMTI 5528 controller card and the ST-506 hard disk
- HD 20 A contains the autoboot ROM
- the two units are connected through DB25 connectors
- connects to the side expansion port, has passthrough connector
- disable switch
Advert (DE)
1988-10
Advert (DE)
1988-10
Advert (DE)
1988-11
Advert (DE)
1989-07
Manufacturer Combitec, Germany | Date 1989 | Amiga A500, A1000 | Interface side expansion port | Autoconfig ID 49160 / 42,43 |
- a HD 20 A hard disk adapter with additional static memory daughterboard(s)
- S-RAM 500
- 512 kB static RAM
- 32k×8 DIPs in 16 sockets on a daughterboard
- S-RAM 1M
- 1 MB static RAM
- 32k×8 DIPs in 32 sockets on two daughterboards
- can be used as Fast RAM expansion or reset resistant RAM disk
- the RAM disk needs a mountlist entry (512 kB: 30 tracks, 32 sectors)
- keeps content over months
- hard disk and memory disable switches
- connects to the side expansion port, has passthrough connector
- optional external power supply
Exterior, top side
Case open with two SRAM daughterboards, front side
Case open with one SRAM daughterboard, front side
Case open with HD-20A baseboard, front side
Advert (DE)
1988-10
Advert (DE)
1988-10
Advert (DE)
1988-11
Advert (DE)
1988-12
Advert (DE)
1989-05
Advert (DE)
1989-07
Manufacturer Combitec, Germany | Date 1988 | Amiga A500 | Interface side expansion port |
- I/O Interface
- 2×16 freely programmable TTL I/O channels
- Triac module: stepless phase-control for 8 220V devices
- Relay module: on/off switching of 8 220V devices
- integrated timer
- software supports multitasking
- control via Amiga Basic possible
- pass-through connector
Advert (DE)
1988-12