Amiga Hardware DatabaseManufacturer “Cabletronic”
9 expansions in database
Manufacturer Cabletronic, Italy | Amiga A500 | Interface trapdoor slot |
- RAM expansion
- 512 kB RAM
- four 256k×4 DIPs, soldered to the board
- connects to the trapdoor slot
top side
bottom side
Manufacturer Cabletronic, Italy | Amiga A500+ | Interface trapdoor slot |
- RAM expansion
- 512 kB RAM
- one 256k×16 RAM chip, soldered to the board
- connects to the trapdoor slot
top side
bottom side
Manufacturer Cabletronic, Italy | Amiga A500, A1000 | Interface side expansion port |
- RAM Expansion
- 2 MB Fast RAM expansion
- power and RAM access LEDs
- plugs into side expansion port
- no passthrough port
Manufacturer Cabletronic, Italy | Amiga A2000, A3000, A4000 | Interface Zorro II |
- Memory Expansion
- sixteen ZIP sockets accept 8 MB RAM
- supports 1M×4 ZIPs
- accepts ZIPs in groups of four giving 2, 4, 6 or 8 MB configurations
- half length card
front side
Advert (IT)
1994-11
Manufacturer Cabletronic, Italy | Date 1994 | Amiga A1200 | Interface trapdoor slot |
- Memory Expansion
- expands the Amiga 1200 with up to 8 MB FastRAM
- 1 MB RAM soldered the board (two 4 MBit SOJ chips)
- 6 SOJ sockets for up to 3 MB RAM, contiguous with the soldered-on RAM
- accepts 256k×16 SOJs in pairs
- 8 ZIP sockets for up to 4 MB RAM
- accepts 1M×4 ZIPs
- optional PLCC FPU, can be clocked either synchronously (14.28 MHz) or asynchronously (up to 50 MHz)
- battery backed up real time clock
- RAM size setting via DIP switch
- for PCMCIA compatibility, a DIP switch can be set which disables the second 4 MB block
Advert (IT)
1994-11
Manufacturer Cabletronic, Italy | Date 1991 | Amiga A500, A2000 | Interface Kickstart socket |
- Kickstart Switcher
- allows the installation of two Kickstarts simultaneously - 1.3 / 2.0 / 3.1
- two ROM sockets
- connects to the Kickstart socket, the original Kickstart chip is placed onto the board
- a wire has to be connected to pin 8 of odd 8520 CIA chip
- DIP switches select the Kickstart the Amiga starts with - by holding the left mouse button, the other ROM can selected for startup
- Cabletronic_KS102W104W.pdf
User Manual (italian)
1065 kB
Manufacturer Cabletronic, Italy | Amiga any Amiga | Interface serial port |
- MIDI Interface
- offers 1× MIDI In, 1× MIDI Through and 1× MIDI Out
- connects to the Amiga via the serial port, no pass-through
- MIDI ports are located at the top, allowing easy access
top side
Advert (IT)
1994-11
Manufacturer Cabletronic, Italy | Amiga any Amiga | Interface parallel port |
- Sound Sampler
- 8 bit stereo soundsampler
- level adjustment knob at the front
- stereo input (2× RCA)
- connects to the parallel port
top side
Advert (IT)
1994-11
Manufacturer Cabletronic, Italy | Date 1996 | Amiga any Amiga | Interface RGB port |
- scandoubler
- doubles the horizontal frequency of the PAL screen mode to 31.5 kHz (all other modes are passed through)
- supports up to 15 bit colour depth (32768 colors)
- connects externally to the 23 pin RGB port and offers a HD15 VGA output
- gets power from the RGB port, thus a weak power supply can cause flickering (for example during floppy accesses)
front side
rear side
- SVGAMI.pdf
user manual (german)
19 kB