Manufacturer “Atéo Concepts”
2 expansions in database
Manufacturer Atéo Concepts, France | Date 1997 | Amiga A1200
| Interface trapdoor slot
| Autoconfig ID 2026 / 252,253 4143 / 252,253
|
ISA busboard
- four ISA slots with 9 MB/s transfer speed
- does not support DMA on its ISA bus
- the adaptor board plugs into the trapdoor CPU connector - accelerators / RAM expansions are still usable
- the busboard is connected by two ribbon cables and could be placed anywhere inside a tower case
- special cards are available for the bus: graphics (Pixel 64), Ethernet (AtéoNet), SCSI, I/O (AtéoSer, AtéoPar)
- any non-DMA ISA cards could be used if drivers were written for
Bus board, front side
Adapter board, front side
Manufacturer Atéo Concepts, France | Date 1997 | Amiga A1200
| Interface AtéoBus
| Autoconfig ID 2026 / 254,255 4143 / 254,255
|
RTG graphics card
- Cirrus Logic GD5434
- 64 bit blitter
- 135 MHz in 8 bit modes
- 85 MHz in 16 bit modes
- 45 MHz in 24 bit modes
- 2 MB 64 bit 50 ns DRAM
- 1 MB (two chips) soldered to board
screen modes
- 1280×1024×8
- 1024×768×16
- 800×600×24
notes
- DPMS support
- 15 pin DSUB connector
- no passthrough
- Picasso96 and CyberGraphX 4.2 drivers
front side