Amiga Hardware DatabaseManufacturer “Applied Engineering”
4 expansions in database
Manufacturer Applied Engineering, USA | Date 1990 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2088 / 16 |
- internal modem
- 2400 bps data transfer speed in standard configuration
- compatible with Bell 103 and 212 protocols, as well as CCITT V.22 bis, V.22 and V.21
- MNP5 option (plug in chip) gives data compression (up to 4800 bps) and error correction
- Send-Fax option allows sending faxes at 4800 bps, but not to receive
- telephone passthrough connector
- autoconfiguring driver software (dl2000.device) in ROM - requires Kickstart 1.3 or later
- up to five DataLinks are supported in one Amiga for bulletin board systems
Board with slot cover, front side
back side
- DataLink2000.pdf
User's Manual
39.3 MB
- aedatalink.dms
Installer's Heaven
install disk
374 kB
Advert (US)
1990-05
Advert (US)
1990-08
Advert (US)
1990-12
Manufacturer Applied Engineering, USA | Date 1990 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2088 / 224 |
- 64 DIP sockets accept 8 MB RAM
- supports 256k×4 (514256) DIPs only, 120 ns or faster
- accepts DIPs in groups of four giving 0.5 - 8 MB configurations in 512 kB increments
- does not require setting switches or jumpers for various memory configuration
- configurations other than 0.5, 1, 2 or 4 MB are considered as an additional RAM card
- works with Kickstart 1.3 only
Manufacturer Applied Engineering, USA | Date 1990 | Amiga A500 | Interface trapdoor slot |
- 512 kB RAM
- 16 socketed 256k×1 DIPs
- connects to the trapdoor slot
- 3.6 volt NiCad battery backed up clock
- very high quality, came with a 5 year guarantee
Advert (US)
1990-05
Advert (US)
1990-08
Manufacturer Applied Engineering, USA | Date 1990 | Amiga A500 | Interface trapdoor slot |
- clock
- a simple battery backed up clock
- connects to the trapdoor slot
Advert (US)
1990-08