Search Result
3 expansions found
Apollo AT500
Company
3-State, Germany
Date
1992
Amiga
A500
Interface
side expansion port
Autoconfig ID
8738 / 34
    IDE controller
  • autoboot ROM (AT-Apollo.device) - autobooting requires at least Kickstart 1.3
  • support for Rigid Disk Block
  • place for a 3.5" hard disk inside the case
  • internal 40 pin IDE header
  • hard disk power connector
  • hard disk activity LED
  • 86 pin expansion connector for the Apollo 520 accelerator board or a 2 MB RAM expansion board
  • connects to the side expansion port, no passthrough connector
  • autoboot disable switch on the back of the case
  • A-Max II and Chamäleon drivers
Photos
3-State Apollo AT500 - front side
front side
3-State Apollo AT500 - back side
back side
Driver / Installation Disk
Vintage Advert

Advert (DE)
1993-01

AT 500
Company
M-Tec, Germany
Date
1992
Amiga
A500
Interface
side expansion port
Autoconfig ID
2192 / 1
1282 / 3
    IDE controller
  • autoboot ROM - autobooting requires at least Kickstart 1.3
  • hard disk activity LED connector
  • RDB compatible
  • 40 pin IDE header for 3.5" drives
  • 44 pin IDE header for 2.5" drives
  • place for a 3.5" hard disk inside the case
    memory
  • four 30 pin SIMM sockets accept up to 8 MB RAM
  • accepts 1 or 4 MB SIMMs in groups of two
  • possible configurations are 2, 4 or 8 MB
  • Kickstart socket
    notes
  • connects to the side expansion port, no passthrough connector
  • hard disk disable and Kickstart selector switches on the top of the case
Photos
M-Tec AT 500 - front side
front side
M-Tec AT 500 - back side
back side
Driver / Installation Disk
Vintage Advert

Advert (DE)
1995-06

Advert (DE)
1995-06

Advert (DE)
1995-12

Advert (DE)
1995-12

Advert (DE)
1993-11

AT 500 Megabody
Company
M-Tec, Germany
Date
1992
Amiga
A500
Interface
68000 socket
Autoconfig ID
2192 / 1
    IDE controller
  • connects to the 68000's socket, the 68000 is replaced onto the board
  • 44 pin IDE header for connecting an internal 2.5" hard disk drive
  • autoboot ROM - autobooting requires at least Kickstart 1.3
  • autoboot disable jumper
  • hard disk activity LED connector
  • feature connector for the optional memory expansion
  • disable switch
  • RDB compatible
    notes
  • fits into the CDTV without problems
  • autobooting is problematic with the CDTV - either a boot floppy has to be used (which a bare CDTV lacks), or after a reset by selecting the hard disk in the Early Startup Menu (which require at least Kickstart 2.0)
  • it's also possible to enable autoboot by disabling the CD-ROM drive, which is done by removing jumper 15 (this generally disables the CDTV boot EPROMs)
Photos
M-Tec AT 500 Megabody - front side
front side
M-Tec AT 500 Megabody - back side
back side
Manual
Driver / Installation Disk
Vintage Advert

Advert (DE)
1993-01

Advert (DE)
1993-08