Amiga Hardware DatabaseCompany Individual Computers, Germany | Date 2009 | Amiga A1000, A500, A500+, A600, A2000, A3000, A3000T | Interface Denise socket |
- flicker-fixer
- all Amiga video modes up to Super Hires are supported and flicker-fixed (with the exception of the A2024 mode)
- picture refresh rate of at least 60 Hz for all screen modes (can be reduced to 50 Hz to avoid tearing effects)
- can output ECS screen modes even with an OCS denise installed, as long as a ECS Agnus is installed
- scanline emulation for non-interlaced modes
- built-in Graffiti emulation
- stacked operation of two Indivision ECS allows a dual screen setup (with different content on each screen)
- PAL and NTSC screen supported
- supports border blanking
- HD15 VGA connector
- header on the board to attach the ribbon cable with the VGA connector
- installs in the Denise socket, the Denise is replaced onto the board
- grounding connection is recommended, a cable (with cable lugs) is provided
- no driver needed, however additional screenmodes are supported:
- HighGFX (1024×786)
- HD720 (1280×720)
- SuperPlus (800×600) - 16 colors out of 4096
- with Picasso96 driver, 256 colors can be displayed on workbench screen
- config tool provided to update flash memory and make adjustments to the output
- suitable for all OCS and ECS Amigas, however acessories or modifications may be required:
- A1000: adapter required due to the power supply being in the way
- A500: no modification necessary
- A500+: no modification necessary
- A600: A603, A604 or A604n memory expansion required, metal shield (if present) has to be removed or cut
- A2000: only for Rev. 4.1/4.3, one electrolytic capacitor (C225) must either be moved or replaced by a flatter version
- A3000: RTC battery has to be moved or removed
- A3000T: card has to be lifted with at least two additional sockets, covers the video slot and interferes with full-length Zorro cards in the uppermost slot
- CDTV: no modification necessary