Schubert Hardware - Amiga Hardware Database

Manufacturer “Schubert Hardware”

1 expansion in database

Manufacturer Schubert Hardware / Alinea Computer, Germany	Date 2017	Amiga any Amiga	Interface RGB port

Manufacturer

Date

2017

Amiga

any Amiga

Interface

RGB port

DVI Converter

converts the analogue RGB video and audio signal of the Amiga into a digital DVI signal
very low latency < 20 ms at 50 Hz (one frame)
scanlines can be displayed to emulate a CRT display, dimmable in 16 levels
supported Amiga video formats:

Lores (320 pixels per line), Hires (640 pixels per line)
interlace and progressive modes
PAL and NTSC
Overscan up to 672×520 at 24 bit color depth, or up to 800×600 at 16 bit color depth (firmware ≥ v1.2 only)

small box that plugs directly into the DB23 RGB port
1× 3.5mm stereo audio input, to be connected to the L+R audio ports of the Amiga
1× HDMI port
control knob on the front panel to set up scanline intensity, video mode, pixel sampling (samples, phase) and x/y position, or perform a reset
two LEDs in the control knob indicate the current mode through color and blinking pattern
on-screen display (OSD) shows current setting on the monitor
firmware update is done through a bootable floppy disk (DF0: only) which displays an image sequence on the RGB port
firmware revision v1.2 provides a 'panic mode' which returns to a default video mode, and improved overscan support through selectable color space
power supply through the Amiga
expansion is incompatible with the CDTV
can be used on the CD32 only with an RGB expansion, due to the lack of an RGB connector at the base model

Notes

front side