Amiga Hardware DatabaseManufacturer “Impulse”
3 expansions in database
Manufacturer Impulse, USA | Date 1990 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2104 / 0,1 |
- framebuffer
- horizontal resolutions: 382, 512, 768, 1024
- vertical resolutions (NTSC): 241, 482
- 1 or 2 MB RAM
- DB23 RGB output connector (15.75 kHz only)
- DB15 passthrough connector
- unless the card is activated, the Amiga graphics is passed through
- in overlay mode colour zero of the Amiga screen is replaced with the Firecracker output
- double buffering
- optional SVHS module
- does not work with internal genlocks but works with many external genlocks
- three pots for adjusting the RGB video levels
- adjustment pots for genlock vertical positioning and genlock vertical timing
- supported by Imagine, ADPro, Turbo Silver 3, Sculpt Animate 3D, Vista Pro
front side
Advert (US)
1991-06
Advert (US)
1991-11
Manufacturer Impulse, USA | Date 1988 | Amiga A500, A1000, A2000 | Interface parallel port |
- framegrabber
- composite video input - NTSC only
- composite video output for viewing the grabbed image
- pressing the space bar, the entire colour image is freezed on the composite monitor in 1/60th seconds and stored in VD-1's own 24 bit framebuffer
- stores images in RGBN format internally
- pressing the return key, the image is sent from the framebuffer to the Amiga and converted to 320×400 HAM
- image transfer takes about 25 seconds through the parallel port
- once the image is displayed on the Amiga screen, it can be refined (RGB levels, brightness, colour dithering) without recapturing - just press the return key to transfer the image from the framebuffer with the new settings
- produces higher quality colour images than FrameGrabber
- housed in a 14×14×2 inches box with internal power supply
- framebuffer
- 768×480 (full overscan) in 24 bit
- allows outputting 24 bit raw RGB images from the Amiga
- supported by Turbo Silver v3.0
Advert (DE)
1989-09
Manufacturer Impulse, USA | Date 1989 | Amiga any Amiga | Interface joystick port |
- Voice Recognition System
- external sound sampler with microphone and voice recognition software
- audio input: 1× microphone jack socket
- sampler plugs into joystick port, the microphone is connected with the sampler
- software learns spoken words or sounds which can be associated with actions on the Amiga by creating either single commands or action sequences via script language
- script language supported functions:
- conditionals
- screen and graphic commands
- string input
- mouse and key emulation
- claimed success rate for recognizing the correct word is 50% - 100%
- can be used to synchronize two Amigas by playing sound effects on one and having actions performed on the other with VoRecOne trained to these effect sounds
top side
- VoRecOne-10.dms
Utility Disk v1.0
Recon v1.0, Voice v1.0, listening.device v1.0
359 kB