Manufacturer “Applied Visions”
2 expansions in database
Future Sound
Manufacturer
Applied Visions, USA
Date
1986
Amiga
A1000
Interface
parallel port
    Sound Sampler
  • 8 bit mono sound sampler for the parallel port
  • based on AD7575 A/D converter
  • mono line input (1× RCA)
  • microphone input (1× 3.5mm jack), for low-impedance microphone (200-800ohm)
  • maximum line level 2.5Vpp
  • level adjustment knob (manual gain control)
  • connects to the specific A1000 parallel port via ribbon cable - for other Amigas, a parallel adapter is needed
  • the parallel port is passed through
  • switch at the front side switches between Future Sound and expansion attached to passed-through parallel port
  • plastic case, with dimensions 5"×1.5"
  • supplied with sampling software
    • software revision 1.0 supports 512KB RAM only
    • revisions ≥ 1.2 support expanded RAM > 512 kB
Photos
Applied Visions Future Sound - front side
front side
Applied Visions Future Sound - back side
back side
Driver / Installation Disk
Vintage Advert

Advert (US)
1986-04

Advert (US)
1986-12

Future Sound 500
Manufacturer
Applied Visions, USA
Date
1988
Amiga
A500, A1000, A2000, A3000, A4000
Interface
parallel port
    Sound Sampler
  • 8 bit stereo sound sampler for the parallel port
  • based on TLC548 A/D converter
  • supports up to 42 kHz stereo sampling rate
  • stereo line input (2× RCA)
  • microphone input (1× 3.5mm jack), for low-impedance microphone (200-800ohm)
  • maximum line level 2.5Vpp
  • level adjustment sliding control (manual gain control)
  • connects to the parallel port via ribbon cable, the parallel port is not passed through
  • supplied with sampling software
  • samples are saved in IFF or FutureSound format
Photos
Applied Visions Future Sound 500 - front side
front side
Driver / Installation Disk
Vintage Advert

Advert (UK)
1989-03

Advert (UK)
1989-09