Amiga Hardware DatabaseSearch Result
4 expansions found
Company Individual Computers, Germany | Date 2000 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 4626 / 23 |
- Ethernet interface
- Realtek 8019AS chipset
- 10Base2 and 10BaseT connectors
- automatic detection of the used connector
- 10 Mbit transfer rate (20 Mbit fullduplex on twisted-pair)
- 16 kB databuffer
- autoprefetch
- automatic polarity correction for 10BaseT
- Noise Filter Bus Interface ensures proper function in heavy-loaded Zorro systems
- SANA 2 driver (MNI driver is in development)
- supported by NetBSD
- expansion ports
- 26 pin expansion port compatible with the one on the Buddha/Catweasel controllers
- two clock ports for A1200 expansions
- two IDE ports: 3,5" and 2,5" - as free add-ons to the X-Surf
- can be activated by the IDE-fix software package
- autobooting is not possible with these ports
- the timing is not configurable
- preemptive use of IDE devices - necessary for CD-writers - is impossible
- all expansion ports are independent from each other and can be used at the same time
front side
back side
- xsurf.lha
Individual Computers
Sana2 driver v1.2
31 kB - xsurfide.lha
Individual Computers
IDE driver v1.04
16 kB
Company Individual Computers, Germany | Date 2013 | Amiga A2000, A3000, A4000 | Interface Zorro II, Zorro III | Autoconfig ID 4626 / 100 |
- Ethernet interface
- Asix AX88796BLF Ethernet chip (NE2000 compatible)
- 100 MBit/s transfer rate
- RJ45 connector
- 16 kB databuffer
- Zorro III interface with Z2/Z3 auto sensing
- SANA 2 and NetBSD drivers
- notes
- jumper to force Zorro II mode
- in systems with 68EC030/68030, the data caches must be disabled
- for operation in Mediator PCI/Zorro daughterboard, the swap jumper must be closed
- local expansion port (48 pin header) for the high-speed USB module RapidRoad that activates the external USB ports
- very slim card, a finger hole in the board allows easier removal
- only compatible with a Merlin graphics card that has the latest fixes installed
- Xsurf100.lha
Individual Computers
Sana2 Driver
260 kB
Company Individual Computers, Germany | Date 2002 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 4626 / 23 |
- Ethernet interface
- Realtek 8019AS chipset
- 10BaseT connector
- 10 Mbit transfer rate
- fullduplex and supports auto-negotiation
- 16 kB databuffer
- autoprefetch
- automatic polarity correction
- Noise Filter Bus Interface ensures proper function in heavy-loaded Zorro systems
- SANA 2 and PPPoE drivers (MNI driver is in development)
- supported by NetBSD
- expansion ports
- 26 pin expansion port compatible with the one on the Buddha/Catweasel controllers
- two clock ports for A1200 expansions
- two IDE ports: 3,5" and 2,5"
- can be activated by the IDE-fix software package
- autobooting is not possible with these ports
- the timing is not configurable
- preemptive use of IDE devices - necessary for CD-writers - is impossible
- all expansion ports are independent from each other and can be used at the same time
front side
back side
- X-Surf2_english.pdf
Individual Computers
installation guide (english)
85 kB - X-Surf2_deutsch.pdf
Individual Computers
installation guide (german)
90 kB
- dsl-rel2.lha
Individual Computers
DSL (PPPoE) driver
104 kB - xsurfide.lha
Individual Computers
IDE driver v1.04
16 kB
Company Individual Computers, Germany | Date 2007 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 4626 / 23 |
- Ethernet interface
- Realtek 8019AS chipset
- 10Base2 and 10BaseT connectors
- automatic detection of the used connector
- 10 Mbit transfer rate (20 Mbit fullduplex on twisted-pair)
- 16 kB databuffer
- autoprefetch
- automatic polarity correction for 10BaseT
- Noise Filter Bus Interface ensures proper function in heavy-loaded Zorro systems
- SANA 2 driver (MNI driver is in development)
- supported by NetBSD
- expansion ports
- 26 pin expansion port compatible with the one on the Buddha/Catweasel controllers
- two clock ports for A1200 expansions
- one IDE port: 3,5" (40 pin header) - as free add-on to the X-Surf
- can be activated by the IDE-fix software package
- autobooting is not possible with these ports
- the timing is not configurable
- preemptive use of IDE devices - necessary for CD-writers - is impossible
- all expansion ports are independent from each other and can be used at the same time