Amiga Hardware Database Expansion cards


5 search results


FastCard Photo
Company
Xetec, USA
 Date
1989
 Amiga
A2000, A3000, A4000
 Interface
Zorro II
 Autoconfig ID
2022 / 1
    SCSI controller
  • AMD 5380 controller IC
  • uses pseudo-DMA transfers
  • place for two 3.5" hard disks on the card
  • autoboot ROM - autobooting requires Kickstart 1.3
  • autoboot disable jumper
  • 50 pin internal SCSI header
  • DB25 external SCSI connector
  • A-Max II driver (harddisk.amhd)



FastCard Plus
Company
Xetec, USA
 Date
1990
 Amiga
A2000, A3000, A4000
 Interface
Zorro II
 Autoconfig ID
2022 / 3,2
    SCSI controller
  • AMD 5380 controller IC
  • uses pseudo-DMA transfers
  • place for a 3.5" hard disk on the card
  • autoboot ROM - autobooting requires Kickstart 1.3
  • autoboot disable jumper
  • 50 pin internal SCSI header
  • DB25 external SCSI connector
  • SCSI network support
  • A-Max II driver (harddisk.amhd)
    memory
  • four 30 pin SIMM sockets accept up to 8 MB RAM
  • accepts 1 or 4 MB SIMMs
  • supports 2, 4 and 8 MB configurations
  • memory disable jumper


FastTrak SA-10 Photo Software
Company
Xetec, USA
 Date
1988
 Amiga
A1000
 Interface
side expansion port
 Autoconfig ID
2022 / 1,2
    SCSI controller
  • AMD 5380 controller IC
  • uses DMA transfers
  • autoboot ROM (harddisk.device) - autobooting requires Kickstart 1.3
  • autoboot disable jumper
  • DB25 external SCSI connector
  • the controller has no internal SCSI connector and there's no place provided for an internal drive - the host adaptor was supplied with an external SCSI drive enclosure and cable
  • A-Max II driver (harddisk.amhd)
    optional memory module - FastRAM 1000
  • four 30 pin SIMM sockets accept up to 8 MB RAM
  • supports 256 kB, 1 MB and 4 MB SIMMs in groups of two
  • SIMM sizes cannot be mixed
  • possible configurations are 512 kB, 1, 2, 4 and 8 MB
    notes
  • the unit can take power either from the A1000 or from the bundled external hard drive - the latter is recommended with the RAM board installed
  • connects to the side expansion port
  • passthrough connector

    Photo
    Xetec FastTrak SA-10 - with FastRAM 1000 memory module top side
    with FastRAM 1000 memory module, top side



FastTrak SA-5 Manual Photo Software
Company
Xetec, USA
 Date
1988
 Amiga
A500
 Interface
side expansion port
 Autoconfig ID
2022 / 1,2
    SCSI controller
  • AMD 5380 controller IC
  • uses DMA transfers
  • autoboot ROM (harddisk.device) - autobooting requires Kickstart 1.3
  • autoboot disable jumper
  • DB25 external SCSI connector
  • the controller has no internal SCSI connector and there's no place provided for an internal drive - the host adaptor was supplied with an external SCSI drive enclosure and cable
  • A-Max II driver (harddisk.amhd)
    optional memory module - FastRam
  • four 30 pin SIMM sockets accept up to 8 MB RAM
  • supports 256 kB, 1 MB and 4 MB SIMMs in groups of two
  • SIMM sizes cannot be mixed
  • possible configurations are 512 kB, 1, 2, 4 and 8 MB
    notes
  • the unit can take power either from the A500 or from the bundled external hard drive - the latter is recommended with the RAM board installed
  • connects to the side expansion port
  • passthrough connector

    Photo
    Xetec FastTrak SA-5 - Exterior top side
    Exterior, top side

    Xetec FastTrak SA-5 - Case opened top side
    Case opened, top side



Mini FastCard Photo Software
Company
Xetec, USA
 Date
1990
 Amiga
A2000, A3000, A4000
 Interface
Zorro II
 
    SCSI controller
  • AMD 5380 controller IC
  • uses pseudo-DMA transfers
  • autoboot ROM - autobooting requires Kickstart 1.3
  • autoboot disable jumper
  • 50 pin internal SCSI header
  • half length card, there's no provision for mounting a hard disk on it




About Search Links