Amiga Hardware DatabaseSearch Result
4 expansions found
Manufacturer Individual Computers, Germany | Date 2012 | Amiga A3000, A4000 | Interface Zorro III | Autoconfig ID 3643 / 32 |
- memory expansion
- 256 MB FastRAM, not expandable
- SD-RAM interface
- Zorro III interface (doesn't work in Zorro II slots)
- supports DMA (if Buster 11 is installed)
- asynchronous design
- memory autoconfiguration
Manufacturer DKB, USA | Date 1993 | Amiga A3000, A4000 | Interface Zorro III | Autoconfig ID 2012 / 14 |
- four 72 pin SIMM sockets accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs 80 ns or faster
- when different size of SIMMs are installed the "3128" program has to be added to the beginning of the Startup-Sequence - otherwise the system will assume that every SIMM is as large as the largest one
- if used with a Commodore A3640 processor board, that must be at least revision 3.1
front side
back side
- DKB-ThePeripheralGuide.pdf
DKB Brochure "The Peripheral Guide"
318 kB - DKB3128.pdf
installation and user manual
100 kB
- DKB3128-10.dms
install disk
3128 program v1.0 (1993-07-10)
75 kB
Advert (US)
1993-11
Manufacturer Progressive Peripherals & Software, USA | Date 1991 | Amiga A3000, A4000 | Interface Zorro III | Autoconfig ID 2026 / 120 |
- sixteen 30 pin SIMM sockets accept 64 MB RAM
- supports 1 or 4 MB SIMMs 60-80 ns
- accepts SIMMs in groups of four
Revision B, front side
Revision B, front side
Revision B, back side
Revision B, back side
Advert (US)
1992-01
Manufacturer AmigaKit, UK | Date 2010 | Amiga A3000, A4000 | Interface Zorro III | Autoconfig ID 3643 / 32 |
- Memory Expansion
- 128 MB or 256 MB FastRAM, RAM is soldered to the board (not expandable by user)
- SD-RAM interface
- Zorro III interface (doesn't work in Zorro II slots)
- supports DMA (if Buster 11 is installed)
- asynchronous design
- memory autoconfiguration
- board measures 130mm x 55mm, doesn't block rear part of the slot
- OEM product from E3B and Individual Computers collaboration