Amiga Hardware DatabaseSearch Result
3 expansions found
Manufacturer Great Valley Products, USA | Date 1993 | Amiga A1200 | Interface trapdoor slot |
- Fast SCSI 2 DMA controller
- non standard SCSI connector - enables 2.5" drives to be connected inside the A1200
- optional external SCSI kit - external DB25 connector
- autoboot ROM (gvpscsi.device)
- memory
- two 64 pin SIMM sockets accept 8 MB RAM
- supports only special 1 or 4 MB GVP SIMMs
- notes
- optional 68882 PLCC FPU up to 50 MHz
- jumper settings
| J1 - | PCMCIA: OFF - compatible |
| J2 - | SIMM size: ON - 1 MB SIMMs, OFF - 4 MB SIMMs |
| CN2 - | FPU clock: 1-2 - from crystal, 2-3 - 14.3 MHz |
| J3 ON | J5, J6, J7, CN4 OFF | CN1, CN3 1-2 | - reserved |
front side
back side
- gvp_53.lzh
GVP-M
SCSI driver update v5.3
425 kB - gvpA1200scsi+ram.DMS
Installer's Heaven
install disk
405 kB
Advert (US)
1993-03
Advert (US)
1993-06
Advert (FR)
1993-07
Manufacturer MicroniK, Germany | Date 1996 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 1 / 170 |
- FastRAM expansion
- one 72 pin SIMM socket for up to 8 MB RAM
- supports 1, 2, 4 or 8 MB SIMMs
- PGA and PLCC socket for optional FPU, 68881/68882 @ 14.28 MHz (clocked synchronously) or 33 / 50 MHz (clocked asynchronously)
- asynchronous FPU operation requires oscillator, this has to be soldered to the board (no socket)
- battery backed up clock
- disable jumper
- with 8 MB RAM installed the board conflicts with the PCMCIA port
- jumper settings
| Jumper | Configuration | Setting |
| S0 | RAM enable | ON - RAM enabled, OFF - RAM disabled |
| S1, S2 | RAM size | 1 MB - ON ON 2 MB - ON OFF 4 MB - OFF ON 8 MB - OFF OFF |
| S3 | PCMCIA setting | ON - no PCMCIA RAM, OFF - 4 MB + 2 MB + 4 MB PCMCIA |
| FPU Jumper | FPU Mode setting | LEFT - synchronous, RIGHT - asynchronous |
- RA-1208.pdf
Einbauanleitung (german)
981 kB
Advert (DE)
1996-12
Manufacturer MicroniK, Germany | Date 1996 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 1 / 170 |
- FastRAM expansion
- two 72 pin SIMM sockets for up to 10 MB RAM
- supports 1, 2, 4 or 8 MB SIMMs
- PGA socket for optional FPU, 68881/68882 @ 14.28 MHz (clocked synchronously) or 33 / 50 MHz (clocked asynchronously)
- asynchronous FPU operation requires oscillator, this has to be soldered to the board (no socket)
- battery backed up clock
- jumper settings
- JP2 settings:
| Jumper | Configuration | Setting |
| JP1 | FPU Mode setting | LEFT - asynchronous, RIGHT - synchronous |
| JP2 | RAM size | see next table |
| PCMCIA | Bank A | Bank B | 1-2 | 3-4 | 5-6 | 7-8 | Total |
| - | 1 MB | - | ON | ON | ON | ON | 1 MB |
| - | 2 MB | - | ON | ON | ON | OFF | 2 MB |
| - | 1 MB | 1 MB | ON | ON | ON | OFF | 2 MB |
| - | 2 MB | 2 MB | ON | OFF | ON | OFF | 4 MB |
| - | 4 MB | - | ON | ON | OFF | ON | 4 MB |
| - | 4 MB | 4 MB | ON | ON | OFF | OFF | 8 MB |
| - | 8 MB | - | ON | ON | OFF | OFF | 8 MB |
| yes | 4 MB | 4 MB | ON | OFF | OFF | ON | 10 MB |
| yes | 8 MB | - | ON | OFF | OFF | ON | 10 MB |
| - | 8 MB | 2 MB | ON | OFF | OFF | OFF | 10 MB |
| - | 8 MB | 4 MB | ON | OFF | OFF | OFF | 10 MB |
Advert (DE)
1996-12