Amiga Hardware DatabaseSearch Result
2 expansions found
Company Phase 5 Digital Products, Germany | Date 1996 | Amiga A2000 | Interface CPU slot | Autoconfig ID 8512 / 24 |
- processor
- 68040 @ 40 MHz / 68060 @ 50 MHz
- the 68040s are recycled from used Macs
- memory
- four 72 pin SIMM sockets accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs, 70 ns or faster
- fully autoconfiguring
- maprom selectable by jumper
- Fast SCSI 2 DMA controller
- 7 MB/s asynchronous, 10 MB/s synchronous transfer speed
- 50 pin internal header
- 50 pin external connector
- supported by Linux, NetBSD and OpenBSD
- notes
- 68000 fallback mode selectable with a simple keystroke at startup - works only with rev. B A2000s
- Blizzard 2040 ERC boards with SN# A400001 - A400094 were delivered with a defective DiagROM
- the 68040 processor is recognized as 68LC040 or 68EC040
- boards with these serial numbers had to be sent back to Phase5 to obtain a new DiagROM set including a new SCSI driver
front side
back side
front side
front side
back side
back side
- Blizzard2060.pdf
DCE
user manual (DCE, english)
160 kB - Blizzard2060-de.pdf
user manual (DCE, german)
158 kB
- P5-SystemDisk-421.dms
install disk v2.0
68060.library v42.1 (14.10.1997), ppc.library v44.29Beta
297 kB - P5-SystemDisk-431.dms
install disk v2.0
68060.library v43.1 (05.02.1998), ppc.library 45.17Beta
353 kB - P5-SCSI-Tools-13.dms
SCSI tool disk v1.3
(for driver versions before v7.x)
425 kB - P5-SCSI-Tools-20.lha
SCSI tool disk v2.0
222 kB - P5-SCSI-Tools-21.dms
SCSI tool disk v2.1
287 kB - P5-SCSI-Tools-22.dms
SCSI tool disk v2.2
520 kB - P5-SCSI-Tools-24.dms
SCSI tool disk v2.4
520 kB
Advert (DE)
1995-08
Advert (DE)
1996-05
Advert (DE)
1996-09
Company DKB, USA | Date 1996 | Amiga A2000 | Interface CPU slot | Autoconfig ID 2012 / 23,255 |
- processor
- 68060 @ 50 MHz
- memory
- four 72 pin SIMM sockets accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs, 60-80 ns
- 64 bit interleaved RAM access if identical SIMMs are installed in alternate banks (U312 / U314 and U313 / U315)
- only SIMMs with 1K refresh rate are supported (SIMMs with 4K refresh rate don't work)
- Fast SCSI 2 controller
- 10 MB/s max transfer speed
- 50 pin internal header
- 50 pin external high density connector
- uses wildfirescsi.device
- Ethernet
- DEC Tulip 21040, the only Ethernet controller in Amigas that DMAs directly into fast 32 bit memory
- up to 100 Mb/s transfer speed
- 10Base-T connector
- internal slot for the optional 10Base-2 connector
- has SANA II, but no MNI driver
- notes
- works only with Kickstart 3.x
- flash ROM for firmware upgrades
- two PCI bus slots (one for the Inferno graphics board)
- JP104 jumper setting: ON = 70 or 80ns / OFF = 60ns (all other jumpers are reserved)
- configuration screen can be activated by holding right mouse button during startup
front side
back side
- Wildfire.pdf
user manual
334 kB
- WildFire.dms
install disk
328 kB
Advert (US)
1995-08
Advert (US)
1995-11