2 search results Apollo 500Apollo AT500 Apollo 500 Company 3-State, Germany   Date 1992   Amiga A500   Interface side expansion port   SCSI 2 and IDE controller uses polled I/O instead of DMA transfer autoboot ROM (SCSI-Apollo.device) - autobooting requires at least Kickstart 1.3 support for Rigid Disk Block and Direct SCSI place for a 3.5" hard disk inside the case internal 50 pin SCSI header and 40 pin IDE header external DB25 SCSI connector hard disk activity LED memory sixteen ZIP sockets accept 8 MB RAM supports 1M×4 FastPage or Static Column ZIPs accepts ZIPs in groups of four giving 2, 4, 6 or 8 MB RAM two 30 pin SIP sockets accept 2 MB RAM the SIP sockets are hardwired to the first bank of ZIP sockets, they cannot be used at the same time notes 86 pin internal expansion header for the Apollo 520 accelerator board connects to the side expansion port, no passthrough connector disable switch on the back of the case Photo front side Software ApolloInstall-50.dms (197 kB) install disk v5.0   Apollo AT500 Company 3-State, Germany   Date 1992   Amiga A500   Interface side expansion port   Autoconfig ID 8738 / 34 IDE controller autoboot ROM (AT-Apollo.device) - autobooting requires at least Kickstart 1.3 support for Rigid Disk Block place for a 3.5" hard disk inside the case internal 40 pin IDE header hard disk power connector hard disk activity LED 86 pin expansion connector for the Apollo 520 accelerator board or a 2 MB RAM expansion board connects to the side expansion port, no passthrough connector autoboot disable switch on the back of the case A-Max II and Chamäleon drivers Photo front side back side Software ApolloInstall-50.dms (197 kB) install disk v5.0